On Wed, May 20, 2009 at 4:07 AM, Wolfram Sang <w.s...@pengutronix.de> wrote:
> Add a node for the i2c eeprom and delete the superflous gpio-example.
>
> Signed-off-by: Wolfram Sang <w.s...@pengutronix.de>
> Cc: Grant Likely <grant.lik...@secretlab.ca>
> Cc: linuxppc-dev@ozlabs.org
> ---
>  arch/powerpc/boot/dts/pcm030.dts |   26 ++++----------------------
>  1 files changed, 4 insertions(+), 22 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/pcm030.dts 
> b/arch/powerpc/boot/dts/pcm030.dts
> index 8958347..33ce488 100644
> --- a/arch/powerpc/boot/dts/pcm030.dts
> +++ b/arch/powerpc/boot/dts/pcm030.dts
> @@ -258,34 +258,16 @@
>                                compatible = "nxp,pcf8563";
>                                reg = <0x51>;
>                        };
> -                       /* FIXME: EEPROM */
> +                       eep...@52 {
> +                               compatible = "at24,24c32";
> +                               reg = <0x52>;
> +                       };

Grant suggested this earlier...
                        eep...@52 {
                                compatible = "atmel,24c32", "eeprom";
                                reg = <0x52>;
                        };




>                };
>
>                s...@8000 {
>                        compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
>                        reg = <0x8000 0x4000>;
>                };
> -
> -               /* This is only an example device to show the usage of gpios. 
> It maps all available
> -                * gpios to the "gpio-provider" device.
> -                */
> -               gpio {
> -                       compatible = "gpio-provider";
> -
> -                                                   /* mpc52xx          
> exp.con         patchfield */
> -                       gpios = <&gpio_wkup     0 0 /* GPIO_WKUP_7      11d   
>           jp13-3     */
> -                                &gpio_wkup     1 0 /* GPIO_WKUP_6      14c   
>                      */
> -                                &gpio_wkup     6 0 /* PSC2_4           43c   
>           x5-11      */
> -                                &gpio_simple   2 0 /* IRDA_1           24c   
>           x7-6    set GPS_PORT_CONFIG[IRDA] = 0 */
> -                                &gpio_simple   3 0 /* IRDA_0                 
>           x8-5    set GPS_PORT_CONFIG[IRDA] = 0 */
> -                                &gpt2          0 0 /* timer2           12d   
>           x4-4       */
> -                                &gpt3          0 0 /* timer3           13d   
>           x6-4       */
> -                                &gpt4          0 0 /* timer4           61c   
>           x2-16      */
> -                                &gpt5          0 0 /* timer5           44c   
>           x7-11      */
> -                                &gpt6          0 0 /* timer6           60c   
>           x8-15      */
> -                                &gpt7          0 0 /* timer7           36a   
>           x17-9      */
> -                                >;
> -               };
>        };
>
>        ...@f0000d00 {
> --
> 1.6.2
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>



-- 
Jon Smirl
jonsm...@gmail.com
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to