Hi, Poonam
Poonam Aggrwal wrote:
Adds P2020RDB basic support in linux.
Overview of P2020RDB platform
- DDR
DDR2 1G
- NOR Flash
16MByte
- NAND Flash
32MByte
- 3 Ethernet interfaces
1) etSEC1
- RGMII
- connected to a 5 port Vitesse Switch(VSC7385)
- Switch is memory mapped through eLBC interface(CS#2)
- IRQ1
2) etSEC2
- SGMII
- connected to VSC8221
- IRQ2
3) etSEC3
- RGMII
- connected to VSC8641
- IRQ3
- 2 1X PCIe interfaces
- SD/MMC ,USB
- SPI EEPROM
- Serial I2C EEPROM
Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com>
---
based on http://www.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
arch/powerpc/boot/dts/p2020rdb.dts | 586 +++++++++++++++++++++++++++++
arch/powerpc/configs/mpc85xx_defconfig | 1 +
arch/powerpc/platforms/85xx/Kconfig | 9 +
arch/powerpc/platforms/85xx/Makefile | 3 +-
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 141 +++++++
5 files changed, 739 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p2020rdb.dts
create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_rdb.c
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts
b/arch/powerpc/boot/dts/p2020rdb.dts
new file mode 100644
index 0000000..d6d8131
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -0,0 +1,586 @@
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,p2...@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,p2...@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ local...@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x08000000>;
The comment is a bit misleading, CS2 is L2 switch. Also, are you sure
the CS2 range shouldn't look like
0x2 0x0 0x0 0xffb00000 0x00020000
That's what L2switch reg property suggests.
+
+ n...@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ vitesse-7385...@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
Partitions should be declared as
partit...@0 {
reg = ...
label = ...
...
}
Felix.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
