On Aug 5, 2009, at 11:25 PM, Felix Radensky wrote:
Hi, Poonam
Poonam Aggrwal wrote:
Adds P2020RDB basic support in linux.
Overview of P2020RDB platform
- DDR
DDR2 1G
- NOR Flash
16MByte
- NAND Flash
32MByte
- 3 Ethernet interfaces
1) etSEC1
- RGMII
- connected to a 5 port Vitesse Switch(VSC7385)
- Switch is memory mapped through eLBC interface(CS#2)
- IRQ1
2) etSEC2
- SGMII
- connected to VSC8221
- IRQ2
3) etSEC3
- RGMII
- connected to VSC8641
- IRQ3
- 2 1X PCIe interfaces
- SD/MMC ,USB
- SPI EEPROM
- Serial I2C EEPROM
Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com>
---
based on http://www.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
arch/powerpc/boot/dts/p2020rdb.dts | 586 +++++++++++++++++++
++++++++++
arch/powerpc/configs/mpc85xx_defconfig | 1 +
arch/powerpc/platforms/85xx/Kconfig | 9 +
arch/powerpc/platforms/85xx/Makefile | 3 +-
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 141 +++++++
5 files changed, 739 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p2020rdb.dts
create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_rdb.c
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/
dts/p2020rdb.dts
new file mode 100644
index 0000000..d6d8131
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -0,0 +1,586 @@
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or
modify it
+ * under the terms of the GNU General Public License as
published by the
+ * Free Software Foundation; either version 2 of the License, or
(at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,p2...@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,p2...@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ local...@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x08000000>;
The comment is a bit misleading, CS2 is L2 switch. Also, are you sure
the CS2 range shouldn't look like
0x2 0x0 0x0 0xffb00000 0x00020000
That's what L2switch reg property suggests.
Did you plan on making this change?
+ n...@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ vitesse-7385...@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
Partitions should be declared as
partit...@0 {
reg = ...
label = ...
...
}
Felix.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
