On Fri, Oct 14, 2011 at 12:36:33PM -0600, Greg KH wrote:
> On Fri, Oct 14, 2011 at 08:31:45PM +0200, Hans J. Koch wrote:
> > On Thu, Oct 13, 2011 at 10:50:58AM -0500, Kumar Gala wrote:
> > > From: Kai Jiang <kai.ji...@freescale.com>
> > >
> > > To support >32-bit physical addresses for UIO_MEM_PHYS type we need to
> > > extend the width of 'addr' in struct uio_mem. Numerous platforms like
> > > embedded PPC, ARM, and X86 have support for systems with larger physical
> > > address than logical.
> > >
> > > Since 'addr' may contain a physical, logical, or virtual address the
> > > easiest solution is to just change the type to 'phys_addr_t' which
> > > should always be greater than or equal to the sizeof(void *) such that
> > > it can properly hold any of the address types.
> > >
> > > For physical address we can support up to a 44-bit physical address on a
> > > typical 32-bit system as we utilize remap_pfn_range() for the mapping of
> > > the memory region and pfn's are represnted by shifting the address by
> > > the page size (typically 4k).
> > >
> > > Signed-off-by: Kai Jiang <kai.ji...@freescale.com>
> > > Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com>
> > > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
> >
> > Signed-off-by: "Hans J. Koch" <h...@hansjkoch.de>
> >
> > That looks good to me. There's an unnecessary cast (see below), but I fixed
> > that
> > on the way.
> >
> > Greg, please pull this from branch uio-for-gregkh from
> >
> > git://hansjkoch.de/git/linux-hjk
>
> Care to send it as an email? I can apply it easier that way as I have
> limited internet access while on the road.
>
> greg k-h
>From b00f4ca33322a48928624ae3c34dc5fe9d2f40ff Mon Sep 17 00:00:00 2001
From: Kai Jiang <kai.ji...@freescale.com>
Date: Fri, 14 Oct 2011 20:04:43 +0200
Subject: [PATCH] uio: Support physical addresses >32 bits on 32-bit systems
From: Kai Jiang <kai.ji...@freescale.com>
To support >32-bit physical addresses for UIO_MEM_PHYS type we need to
extend the width of 'addr' in struct uio_mem. Numerous platforms like
embedded PPC, ARM, and X86 have support for systems with larger physical
address than logical.
Since 'addr' may contain a physical, logical, or virtual address the
easiest solution is to just change the type to 'phys_addr_t' which
should always be greater than or equal to the sizeof(void *) such that
it can properly hold any of the address types.
For physical address we can support up to a 44-bit physical address on a
typical 32-bit system as we utilize remap_pfn_range() for the mapping of
the memory region and pfn's are represnted by shifting the address by
the page size (typically 4k).
Signed-off-by: Kai Jiang <kai.ji...@freescale.com>
Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com>
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
Signed-off-by: Hans J. Koch <h...@hansjkoch.de>
---
Documentation/DocBook/uio-howto.tmpl | 2 +-
drivers/uio/uio.c | 7 +++----
include/linux/uio_driver.h | 7 +++++--
3 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/Documentation/DocBook/uio-howto.tmpl
b/Documentation/DocBook/uio-howto.tmpl
index 7c4b514d..54883de 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -529,7 +529,7 @@ memory (e.g. allocated with
<function>kmalloc()</function>). There's also
</para></listitem>
<listitem><para>
-<varname>unsigned long addr</varname>: Required if the mapping is used.
+<varname>phys_addr_t addr</varname>: Required if the mapping is used.
Fill in the address of your memory block. This address is the one that
appears in sysfs.
</para></listitem>
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index d2efe82..c0626ea 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -69,7 +69,7 @@ static ssize_t map_name_show(struct uio_mem *mem, char *buf)
static ssize_t map_addr_show(struct uio_mem *mem, char *buf)
{
- return sprintf(buf, "0x%lx\n", mem->addr);
+ return sprintf(buf, "0x%llx\n", (unsigned long long)mem->addr);
}
static ssize_t map_size_show(struct uio_mem *mem, char *buf)
@@ -79,7 +79,7 @@ static ssize_t map_size_show(struct uio_mem *mem, char *buf)
static ssize_t map_offset_show(struct uio_mem *mem, char *buf)
{
- return sprintf(buf, "0x%lx\n", mem->addr & ~PAGE_MASK);
+ return sprintf(buf, "0x%llx\n", (unsigned long long)mem->addr &
~PAGE_MASK);
}
struct map_sysfs_entry {
@@ -634,8 +634,7 @@ static int uio_vma_fault(struct vm_area_struct *vma, struct
vm_fault *vmf)
if (idev->info->mem[mi].memtype == UIO_MEM_LOGICAL)
page = virt_to_page(idev->info->mem[mi].addr + offset);
else
- page = vmalloc_to_page((void *)idev->info->mem[mi].addr
- + offset);
+ page = vmalloc_to_page((void *)idev->info->mem[mi].addr +
offset);
get_page(page);
vmf->page = page;
return 0;
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index 665517c..fd99ff9 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -23,7 +23,10 @@ struct uio_map;
/**
* struct uio_mem - description of a UIO memory region
* @name: name of the memory region for identification
- * @addr: address of the device's memory
+ * @addr: address of the device's memory (phys_addr is used since
+ * addr can be logical, virtual, or physical & phys_addr_t
+ * should always be large enough to handle any of the
+ * address types)
* @size: size of IO
* @memtype: type of memory addr points to
* @internal_addr: ioremap-ped version of addr, for driver internal use
@@ -31,7 +34,7 @@ struct uio_map;
*/
struct uio_mem {
const char *name;
- unsigned long addr;
+ phys_addr_t addr;
unsigned long size;
int memtype;
void __iomem *internal_addr;
--
1.7.6.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
