The patch intends to initialize PHB3 during system boot stage. The
flag "PNV_PHB_MODEL_PHB3" is introduced to differentiate IODA2
compatible PHB3 from other types of PHBs.
Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 62 +++++++++++++++--------------
arch/powerpc/platforms/powernv/pci.c | 7 +++-
arch/powerpc/platforms/powernv/pci.h | 8 ++-
3 files changed, 43 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index 8e90e89..8993242 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -852,18 +852,19 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb,
struct pci_bus *bus,
return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
}
-void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type)
{
struct pci_controller *hose;
static int primary = 1;
struct pnv_phb *phb;
unsigned long size, m32map_off, iomap_off, pemap_off;
const u64 *prop64;
+ const u32 *prop32;
u64 phb_id;
void *aux;
long rc;
- pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+ pr_info(" Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name);
prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
if (!prop64) {
@@ -890,37 +891,34 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
hose->last_busno = 0xff;
hose->private_data = phb;
phb->opal_id = phb_id;
- phb->type = PNV_PHB_IODA1;
+ phb->type = ioda_type;
/* Detect specific models for error handling */
if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
phb->model = PNV_PHB_MODEL_P7IOC;
+ else if (of_device_is_compatible(np, "ibm,p8-pciex"))
+ phb->model = PNV_PHB_MODEL_PHB3;
else
phb->model = PNV_PHB_MODEL_UNKNOWN;
- /* We parse "ranges" now since we need to deduce the register base
- * from the IO base
- */
+ /* Parse 32-bit and IO ranges (if any) */
pci_process_bridge_OF_ranges(phb->hose, np, primary);
primary = 0;
- /* Magic formula from Milton */
+ /* Get registers */
phb->regs = of_iomap(np, 0);
if (phb->regs == NULL)
pr_err(" Failed to map registers !\n");
-
- /* XXX This is hack-a-thon. This needs to be changed so that:
- * - we obtain stuff like PE# etc... from device-tree
- * - we properly re-allocate M32 ourselves
- * (the OFW one isn't very good)
- */
-
/* Initialize more IODA stuff */
- phb->ioda.total_pe = 128;
+ prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
+ if (!prop32)
+ phb->ioda.total_pe = 1;
+ else
+ phb->ioda.total_pe = *prop32;
phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
- /* OFW Has already off top 64k of M32 space (MSI space) */
+ /* FW Has already off top 64k of M32 space (MSI space) */
phb->ioda.m32_size += 0x10000;
phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
@@ -930,7 +928,10 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
- /* Allocate aux data & arrays */
+ /* Allocate aux data & arrays
+ *
+ * XXX TODO: Don't allocate io segmap on PHB3
+ */
size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
m32map_off = size;
size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
@@ -960,7 +961,7 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
hose->mem_resources[2].start = 0;
hose->mem_resources[2].end = 0;
-#if 0
+#if 0 /* We should really do that ... */
rc = opal_pci_set_phb_mem_window(opal->phb_id,
window_type,
window_num,
@@ -974,16 +975,6 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
phb->ioda.m32_size, phb->ioda.m32_segsize,
phb->ioda.io_size, phb->ioda.io_segsize);
- if (phb->regs) {
- pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100));
- pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160));
- pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170));
- pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178));
- pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180));
- pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190));
- pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
- pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
- }
phb->hose->ops = &pnv_pci_ops;
/* Setup RID -> PE mapping function */
@@ -1011,7 +1002,18 @@ void __init pnv_pci_init_ioda1_phb(struct device_node
*np)
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET,
OPAL_ASSERT_RESET);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n",
rc);
- opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+
+ /*
+ * On IODA1 map everything to PE#0, on IODA2 we assume the IODA reset
+ * has cleared the RTT which has the same effect
+ */
+ if (ioda_type == PNV_PHB_IODA1)
+ opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void pnv_pci_init_ioda2_phb(struct device_node *np)
+{
+ pnv_pci_init_ioda_phb(np, PNV_PHB_IODA2);
}
void __init pnv_pci_init_ioda_hub(struct device_node *np)
@@ -1034,6 +1036,6 @@ void __init pnv_pci_init_ioda_hub(struct device_node *np)
for_each_child_of_node(np, phbn) {
/* Look for IODA1 PHBs */
if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
- pnv_pci_init_ioda1_phb(phbn);
+ pnv_pci_init_ioda_phb(phbn, PNV_PHB_IODA1);
}
}
diff --git a/arch/powerpc/platforms/powernv/pci.c
b/arch/powerpc/platforms/powernv/pci.c
index b8b8e0b..e088dc7 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -525,12 +525,13 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
pnv_pci_dma_fallback_setup(hose, pdev);
}
-/* Fixup wrong class code in p7ioc root complex */
+/* Fixup wrong class code in p7ioc and p8 root complex */
static void pnv_p7ioc_rc_quirk(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x2da, pnv_p7ioc_rc_quirk);
static int pnv_pci_probe_mode(struct pci_bus *bus)
{
@@ -591,6 +592,10 @@ void __init pnv_pci_init(void)
if (!found_ioda)
for_each_compatible_node(np, NULL, "ibm,p5ioc2")
pnv_pci_init_p5ioc2_hub(np);
+
+ /* Look for ioda2 built-in PHB3's */
+ for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
+ pnv_pci_init_ioda2_phb(np);
}
/* Setup the linkage between OF nodes and PHBs */
diff --git a/arch/powerpc/platforms/powernv/pci.h
b/arch/powerpc/platforms/powernv/pci.h
index 7cfb7c8..4ce91f5 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -4,9 +4,9 @@
struct pci_dn;
enum pnv_phb_type {
- PNV_PHB_P5IOC2,
- PNV_PHB_IODA1,
- PNV_PHB_IODA2,
+ PNV_PHB_P5IOC2 = 0,
+ PNV_PHB_IODA1 = 1,
+ PNV_PHB_IODA2 = 2,
};
/* Precise PHB model for error management */
@@ -14,6 +14,7 @@ enum pnv_phb_model {
PNV_PHB_MODEL_UNKNOWN,
PNV_PHB_MODEL_P5IOC2,
PNV_PHB_MODEL_P7IOC,
+ PNV_PHB_MODEL_PHB3,
};
#define PNV_PCI_DIAG_BUF_SIZE 4096
@@ -150,6 +151,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table
*tbl,
u64 dma_offset);
extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
extern void pnv_pci_init_ioda_hub(struct device_node *np);
+extern void pnv_pci_init_ioda2_phb(struct device_node *np);
#endif /* __POWERNV_PCI_H */
--
1.7.5.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
