Hi Kunal, Apologies if I post this twice - our mail server is unreliable atm... > <snip> > I used crosstool with gcc 4.1.1 w/glibc 2.3.6. My xparameters_ml300.h > and .config files are pasted below. > > The problem: > The kernel panics after printing out the message "Now booting the > kernel" The exact output is this: > > loaded at: 00400000 0089C1E4 > board data at: 00000000 00000018 > relocated to: 00405238 00405250 > zimage at: 00405BD3 004AFDF5 > initrd at: 004B0000 00898382 > avail ram: 0089D000 55555555 > > Linux/PPC load: root=/dev/ram > Uncompressing Linux...done. > Now booting the kernel > > > I had the exact same problem for a different board, using the PPC in a Virtex 4 FX12, using the 2.6 kernel. I fixed this by rolling the compiler back to version 4.0.2. Didn't do a lot of thinking about why it worked, but I think it has something to do with the linker and your board data (it randomly changed location every time I tried to boot). I believe it should be in the 0x00400000 range as well (not 0x00 as it is in your capture).
As a side note: Are there any known issues using GCC 4.1.1? Cheers, Mike _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
