linuxppc-embedded  

Messages by Thread

• • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Grant Likely
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Josh Boyer
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Grant Likely
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Segher Boessenkool
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Arnd Bergmann
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Grant Likely
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Arnd Bergmann
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Josh Boyer
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Segher Boessenkool
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Segher Boessenkool
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Victor Gallardo
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Josh Boyer
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Victor Gallardo
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Stefan Roese
  • Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x Victor Gallardo
• Failure of request_irq() for MPC8313 using arch=powerpc Duy-Ky Nguyen
  • RE: Failure of request_irq() for MPC8313 using arch=powerpc Liu Dave
  • Re: Failure of request_irq() for MPC8313 using arch=powerpc Duy-Ky Nguyen
  • Re: Failure of request_irq() for MPC8313 using arch=powerpc Scott Wood
  • Re: Failure of request_irq() for MPC8313 using arch=powerpc Duy-Ky Nguyen
• Videomode 800x480 Alex_SYS
  • Re: Videomode 800x480 Anatolij Gustschin
  • Re: Videomode 800x480 Alex_SYS
  • Re: Videomode 800x480 Alex_SYS
  • Re: Videomode 800x480 Anatolij Gustschin
  • Re: Videomode 800x480 Alex_SYS
  • Re: Videomode 800x480 Detlev Zundel
  • Re: Videomode 800x480 Alex_SYS
• Please Help me for generating the download.bit image Naresh Bhat
• Is there anybody created the ML403 firmware in which XEMAC configured in "Scattered DMA" Mode Naresh Bhat
  • Is there anybody created the ML403 firmware in which XEMAC configured in "Scattered DMA" Mode Naresh Bhat
• NAND Flash, Localbus and UPM Alemao
  • Re: NAND Flash, Localbus and UPM Marco Stornelli
• MPC8313 ERDB has proper interrupt mapping for TSEC? selvamuthukumar v
  • Re: MPC8313 ERDB has proper interrupt mapping for TSEC? Kumar Gala
• MC146818 support and migration from todc to rtc, guidance please Stephen Horton
• rtc integration with hwclock mahendra varman
• EXT2-fs error when trying to work with highmem Nadav Sharabi
  • EXT2-fs error when trying to work with highmem Nadav Sharabi
• LIME on MPC5200B ioremap problem Alex_SYS
• insmod: unresolved symbol XIo_In32/XIo_Out32 Juliana Su
  • Re: insmod: unresolved symbol XIo_In32/XIo_Out32 Grant Likely
  • Re: insmod: unresolved symbol XIo_In32/XIo_Out32 Juliana Su
  • Re: insmod: unresolved symbol XIo_In32/XIo_Out32 Grant Likely
  • Re: insmod: unresolved symbol XIo_In32/XIo_Out32 Juliana Su
  • Re: insmod: unresolved symbol XIo_In32/XIo_Out32 Joachim Foerster
• linux boot sequence Rami WEHBI
  • Re: linux boot sequence Wolfgang Denk
  • linux boot sequence Siva Prasad
  • RE: linux boot sequence Siva Prasad
  • RE: linux boot sequence Rami WEHBI
  • RE: linux boot sequence Siva Prasad
• mpc744x, Marvell mv6446x kernel guidance please Stephen Horton
  • Re: mpc744x, Marvell mv6446x kernel guidance please Marco Stornelli
  • RE: mpc744x, Marvell mv6446x kernel guidance please Welch, Martyn (GE EntSol, Intelligent Platforms)
  • Re: mpc744x, Marvell mv6446x kernel guidance please Mark A. Greer
  • RE: mpc744x, Marvell mv6446x kernel guidance please Stephen Horton
  • Re: mpc744x, Marvell mv6446x kernel guidance please Dale Farnsworth
  • RE: mpc744x, Marvell mv6446x kernel guidance please Stephen Horton
• Freescale UCC_GETH Half Duplex Patch Russell McGuire
  • Re: Freescale UCC_GETH Half Duplex Patch Kim Phillips
  • Re: Freescale UCC_GETH Half Duplex Patch Kim Phillips
  • [PATCH]: Freescale UCC_GETH Half Duplex Russell McGuire
• XSysAce: Queue is plugged Joachim Meyer
  • Re: XSysAce: Queue is plugged Grant Likely
• Related to ftp Misbah khan
• linux/powerpc memory management sumedh tirodkar
  • Re: linux/powerpc memory management Scott Wood
  • Re: linux/powerpc memory management sumedh tirodkar
  • Re: linux/powerpc memory management Arnd Bergmann
• PPC Linux start address on XUPV2P board Alan Casey
• unsubscribe Ed Henderson
• merge from arch/ppc to arch/powerpc on lite5200 mejjad lahcen
  • Re: merge from arch/ppc to arch/powerpc on lite5200 Grant Likely
• adeos support for kernel 2.6.20-ppc jim.software
• Booting ML405 (Kernel panic - not syncing: No init found) neeraj garg
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) Marco Stornelli
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) Grant Likely
  • RE: Booting ML405 (Kernel panic - not syncing: No init found) John Linn
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) Neeraj Garg
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) Ron Sass
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) Neeraj Garg
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) neeraj garg
  • RE: Booting ML405 (Kernel panic - not syncing: No init found) John Linn
  • Re: Booting ML405 (Kernel panic - not syncing: No init found) Ron Sass
• Freescale SEC driver with cryptoloop on MPC8567e mike zheng
  • Re: Freescale SEC driver with cryptoloop on MPC8567e Marco Stornelli
• RAMDISK: ran out of compressed data Siva Prasad
  • Re: RAMDISK: ran out of compressed data Marco Stornelli
  • RE: RAMDISK: ran out of compressed data Siva Prasad
  • Re: RAMDISK: ran out of compressed data Marco Stornelli
• flash driver liran raz
  • Re: flash driver Marco Stornelli
  • Re: flash driver Marco Stornelli
• cpc700-i2c driver in linux 2.6 mahendra varman
• booting an ML405 Lorenzo T. Flores
  • Re: booting an ML405 David Baird
  • Re: booting an ML405 Lorenzo T. Flores
  • Re: booting an ML405 Grant Likely
  • Re: booting an ML405 David Baird
  • Re: booting an ML405 Lorenzo T. Flores
  • RE: booting an ML405 John Linn
• Full Linux distributions Brian Silverman
  • Re: Full Linux distributions Leon Woestenberg
  • Re: Full Linux distributions Brian Silverman
  • Re: Full Linux distributions Daniel Stonier
  • Re: Full Linux distributions Detlev Zundel
• Linux issues on Xilinx XUPV2P board Alan Casey
  • Re: Linux issues on Xilinx XUPV2P board wangyanlong
  • Re: Linux issues on Xilinx XUPV2P board Alan Casey
  • Re: Linux issues on Xilinx XUPV2P board wangyanlong
  • Re: Linux issues on Xilinx XUPV2P board Alan Casey
  • RE: Linux issues on Xilinx XUPV2P board John Linn
  • RE: Linux issues on Xilinx XUPV2P board Alan Casey
  • RE: Linux issues on Xilinx XUPV2P board John Linn
  • Re: Linux issues on Xilinx XUPV2P board Jon Loeliger
  • Re: Linux issues on Xilinx XUPV2P board wangyanlong
  • Re: Linux issues on Xilinx XUPV2P board Alan Casey
  • Re: Linux issues on Xilinx XUPV2P board wangyanlong
• Linux on ML403 serial console problem Anand Kumar S
  • Re: Linux on ML403 serial console problem John Bonesio
  • Re: Linux on ML403 serial console problem Grant Likely
• Changing zImage load and entry point address? Dave Littell
• Need stable 2.6 kernel for TQM823L Thomas Maenner
  • Re: Need stable 2.6 kernel for TQM823L Grant Likely
  • Re: Need stable 2.6 kernel for TQM823L Thomas Maenner
  • Re: Need stable 2.6 kernel for TQM823L Grant Likely
  • Re: Need stable 2.6 kernel for TQM823L Thomas Maenner
  • Re: Need stable 2.6 kernel for TQM823L Stefan Roese
  • Re: Need stable 2.6 kernel for TQM823L Jochen Friedrich
  • Re: Need stable 2.6 kernel for TQM823L Thomas Maenner
• RE: Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip (solved!) Vince Asbridge
  • Antwort: RE: Migrating from 2.6.11 to 2.6.23 breaks pci-e joachim . bader
  • RE: Antwort: RE: Migrating from 2.6.11 to 2.6.23 breaks pci-e Vince Asbridge
• [PATCH] DMA Engine: fix error path(s) in fsl-dma driver Sebastian Siewior
  • RE: [PATCH] DMA Engine: fix error path(s) in fsl-dma driver Li Yang
• MPC8313 GPIO Van Dessel Ivan
• High Memory problem on 2.4.22 Linux, 2GB ppc card Ruksen INANIR
  • Re: High Memory problem on 2.4.22 Linux, 2GB ppc card Ruksen INANIR
• National Semi DP83865 Phy on custom hardware with PPC 8540 CPU Ed Henderson
• GPIO on 8360 from dts par_io? Michael Galea
• Rapidio interface in recent kernels Alex Dubov
  • Re: Rapidio interface in recent kernels Kumar Gala
  • Re: Rapidio interface in recent kernels Alex Dubov
• Re: Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip Siva Prasad
  • Re: Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip Kumar Gala
  • RE: Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip Siva Prasad
• Graphic Card on Freescale MPC837x-rdb Bizhan Gholikhamseh (bgholikh)
  • Re: Graphic Card on Freescale MPC837x-rdb Kumar Gala
  • Re: Graphic Card on Freescale MPC837x-rdb Benjamin Herrenschmidt
  • Re: Graphic Card on Freescale MPC837x-rdb Anatolij Gustschin
  • RE: Graphic Card on Freescale MPC837x-rdb Bizhan Gholikhamseh (bgholikh)
• Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip Vince Asbridge
  • Re: Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip Kumar Gala
• Linux on Virtex board with ARCH=powerpc Peter Mendham
  • RE: Linux on Virtex board with ARCH=powerpc John Linn
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • RE: Linux on Virtex board with ARCH=powerpc John Linn
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • RE: Linux on Virtex board with ARCH=powerpc John Linn
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • RE: Linux on Virtex board with ARCH=powerpc John Linn
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • RE: Linux on Virtex board with ARCH=powerpc John Linn
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • Re: Linux on Virtex board with ARCH=powerpc Aaron Sells
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • Re: Linux on Virtex board with ARCH=powerpc Peter Korsgaard
  • Re: Linux on Virtex board with ARCH=powerpc Peter Mendham
  • RE: Linux on Virtex board with ARCH=powerpc Stephen Neuendorffer
• Re: NAND access fail after MMU enabled when booting linux Scott Wood
• how to understand pci section in device tree source file zhanglei459
  • Re: how to understand pci section in device tree source file Scott Wood
• 8xx scc hdlc driver melinda develey
• u-boot, MPC8313erdb Nidhi Dua
  • Re: u-boot, MPC8313erdb Scott Wood
  • RE: u-boot, MPC8313erdb Mike Timmons
• mpc8313erdb Nidhi Dua
  • Re: mpc8313erdb Marco Stornelli
  • mpc8313erdb Nidhi Dua
  • Re: mpc8313erdb Carlos Roberto Moratelli
• Re: [PATCH] fs_enet: restore promiscuous and multicast settings in restart() Jon Loeliger
  • Re: [PATCH] fs_enet: restore promiscuous and multicast settings in restart() Olof Johansson
• problem in MPC8358 HDLC controller Biswal, Debasish
• Updating glibc on SELF image Dave Cogley
  • Re: Updating glibc on SELF image Dave Cogley
  • Re: Updating glibc on SELF image Detlev Zundel
  • Re: Updating glibc on SELF image Dave Cogley
  • Re: Updating glibc on SELF image Detlev Zundel
• mpc5121 cache coherency Kenneth Johansson
  • Re: [U-Boot-Users] mpc5121 cache coherency John Rigby
  • Re: [U-Boot-Users] mpc5121 cache coherency kenneth johansson
• u-boot for ML403 Anand Kumar S
  • Re: u-boot for ML403 Wolfgang Denk
• PCI DMA Problems With 82xx? Mike Winter
  • Re: PCI DMA Problems With 82xx? Scott Wood
  • RE: PCI DMA Problems With 82xx? Rune Torgersen
  • RE: PCI DMA Problems With 82xx? Rune Torgersen
  • Re: PCI DMA Problems With 82xx? Scott Wood
  • Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv? Mike Timmons

• Earlier messages
• Later messages