As I understand it, the 8541 and 8555 have 12 external IRQ[0..11], 21 internal interrupts, and 4 messaging interrupts.
In looking at the MPC8555ERM.pdf file, which is my main resource, it looks like the internal interrupt numbers for the 1st TSEC are 19 for transmit and 20 for receive. A 'cat /proc/interrupts' shows the 1st TSEC transmit as 93 and the receive as 94, so I am puzzled how we get from 19 to 93 for the transmit and from 20 to 94 for the receive. Perhaps understanding this will help me figure out what number to put into the pci_dev structure for external IRQ0. At this particular moment, I can put 16, 32 or other numbers into the pci_dev and do a request_irq for my driver in Linux-2.6.17.11. The driver interrupts are enabled, but when "__do_IRQ" executes, its irq variable is zero, which it should not be. I can also see with a printk in this same "__do_IRQ" that the TSEC tx is indeed 93, the TSEC rx is indeed 94 and the uart is 106. Sorry to be a bit dense here, but understanding this is important to moving forward. Charles Krinke _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
