Hi Leonid, firstly, thanks for reply!
But, are you sure that I cannot access NAND memory via BDI2000? Because I used BDI2000 with the MPC8343M Board and there is "only" 64MB NAND memory. Thus I stored the U-Boot (image was broken) into the flash memory. Frank -----Ursprüngliche Nachricht----- Von: Leonid [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 16. Mai 2007 22:37 An: Frank Prepelica; [email protected] Betreff: RE: BDI2000 configuration file for MPC8313E-RDB AFAIK, BDI2000 doesn't support NAND... of course you can load some code which has NAND support into RAM (even u-boot if compiled properly) and thus program NAND flash. But BDI firmware cannot program NAND directly. Leonid. ________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Prepelica Sent: Wednesday, May 16, 2007 7:25 AM To: [email protected] Subject: BDI2000 configuration file for MPC8313E-RDB Hi all, maybe this is not the appropriate mailing list, sorry for that! but, does anyone got a working BDI2000 configuration file + reg. definitions for MPC8313E-RDB to get access to NAND memory? I got one but there's only access to NOR memory. Many thanks in advance! Best regards Frank _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
