On Friday 18 May 2007, Leonid wrote: > See, it's not a question that BDI2000 can be used with board which has > NAND flash on it, just it's not capable of NAND direct programming as it > does in the case of NOR flash.
Yes, "direct" NAND programming via BDI2000 is not possible. At least not at the moment with the current firmware versions. > I also have AMCC Sequoia board with both NOR and NAND flash. On this > board you can boot u-boot from NOR first and use it to program NAND. Correct. Just a side note: You can also boot the Sequoia from NAND directly if you have programmed the NAND U-Boot version for the Sequoia, as the 440EP(x) supports direct NAND booting. Best regards, Stefan _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
