--- "Mark A. Greer" <mgreer at mvista.com> wrote: [snip] > No problem, Sam. Let me know if you encounter any > problems with it.
Well, encounter one puzzle on bd_info:-) I use 2.6.11 release package on my custom Sandpoint board with u-boot. In 2.6.11 ppcboot.h, I noticed that there were no CONFIG_8260 but CONFIG_CPM2, which had a conflict with bd_info of u-boot. Does CONFIG_CPM2 means CONFIG_8260 in 2.6.x? If so, it seems that I should use CPM2 UART driver rather than the one CONFIG_SERIAL_8250 which is defined by sandpoint_defconfig. Well, CPM2 UART driver support is off line from menuconfig:-( I created one image only with 8250 serial and RAMDISK support kernel. The console setting is "ttyS0,115200". But hanged after loading the kernel... What could the problem be? Thanks for your kind help, Sam _________________________________________________________ Do You Yahoo!? 150??MP3???????????? http://music.yisou.com/ ??????????????????? http://image.yisou.com 1G??1000??????????? http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/
