"Mark A. Greer" <mgreer at mvista.com> wrote: > Sorry for the delay, I was on vacation last week.
Not at all. I experienced a lot during your vacation:) > It could be lots of things. Can you dump __log_buf? > If so, please dump > and send it so we can have a look. If not, try > adding more progress > stmts and telling us exactly where its stopping. OK, I am now up to the joint of early_console and normal console. Switch problem. Perhaps I miss sth or what? ## Booting image at 01200000 ... Image Name: Linux-2.6.11 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 442401 Bytes = 432 kB Load Address: 00000000 Entry Point: 00000000 Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff950000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 4479838 Bytes = 4.3 MB Load Address: 00000000 Entry Point: 00000000 Loading Ramdisk to 03b02000, end 03f47b5e ... OK Loading kernel ...... Linux version 2.6.11 (root at localhost.localdomain) (gcc version 3.2.2 20030217 (Y [snip] Kernel command line: console=uart,mmio,0xfdfce500,115200n8 console=ttyS0,115200 root=/dev/ram rw ramdisk_size=200000 ip=192.168.0.3:192.168..2:::sandpoint:et h0:off panic=1 OpenPIC Version 1.2 (1 CPUs and 6 IRQ sources) at fdfcf000 OpenPIC timer frequency is 100.000000 MHz PID hash table entries: 512 (order: 9, 8192 bytes) time_init: decrementer frequency = 25.000000 MHz first init port.membase = 0x-34585344 Early serial console at MMIO 0xfdfce500 (options '115200n8') Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 63872k available (684k kernel code, 228k data, 92k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Linux NoNET1.0 for Linux 2.6 PCI: Probing PCI hardware PCI: Cannot allocate resource region 1 of device 0000:00:00.0 Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing enabled io scheduler noop registered RAMDISK driver initialized: 16 RAM disks of 200000K size 1024 blocksize No ttyS device at MMIO 0xfdfce500 for console No matter how I changed the uart parameter, still no luck to get any further info. I looked into old_serial_port value and found that all invaild. So how to deal with it next? Thanks, Sam _________________________________________________________ Do You Yahoo!? 150??MP3???????????? http://music.yisou.com/ ??????????????????? http://image.yisou.com 1G??1000??????????? http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/
