Hi, all, I worked on the PCMCIA module for my MPC 857T based board. I downloaded the pcmcia-cs 3.1.29 and modified the file modules/m8xx_pcmcia.c. My board uses the SLOT B. What I did are just like the (F)ADS and RPXLite. I compiled the resulted pcmcia module and loaded them into linux kernel using "insmod". 1. insmod pcmcia_core.o 2. insmod m8xx_pcmcia.o 3. insmod ds.o Here comes the problem. When I inserted ds.o, the driver tells me that "cs: socket 0 timed out during reset" I looked through the source code and the debug info. I found that a lot of the same messages as follows: GetStatus(0) = 0x190 ... Such info come from m8xx_pcmcia.c/m8xx_get_status. It seems that someone is not satisfied with the above return value and " get status " again and again. Then it quit.
Any suggestions are highly appreciated! Thanks a lot Rolf ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
