Liu HongXun-a16975 wrote: > Hi, all, > I worked on the PCMCIA module for my MPC 857T based board. > I downloaded the pcmcia-cs 3.1.29 and modified the file modules/m8xx_pcmcia.c. > My board uses the SLOT B. What I did are just like the (F)ADS and RPXLite. > I compiled the resulted pcmcia module and loaded them into linux kernel using > "insmod". > 1. insmod pcmcia_core.o > 2. insmod m8xx_pcmcia.o > 3. insmod ds.o > Here comes the problem. > When I inserted ds.o, the driver tells me that "cs: socket 0 timed out during > reset" > I looked through the source code and the debug info. > I found that a lot of the same messages as follows: > GetStatus(0) = 0x190 > ... > Such info come from m8xx_pcmcia.c/m8xx_get_status. It seems that someone > is not satisfied with the above return value and " get status " again and > again. > Then it quit. > > Any suggestions are highly appreciated! > Thanks a lot
I'm not familiar with the 857T pcmcia, perhaps the timing is different. Check the timing calculation functions against the 857T UM. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
