Thanks, I had tried stripping off the http: and adding the .git but not just adding the .git.
On 1/30/06, Sylvain Munaut <tnt at 246tnt.com> wrote: > Ooops, > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git > > (notice the previously missing .git at the end) > > > Sylvain > > John Rigby wrote: > > I tried: > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx > > and got: > > defaulting to local storage area > > Cannot get remote repository information. > > Perhaps git-update-server-info needs to be run there? > > > > > > > > On 1/29/06, Sylvain Munaut <tnt at 246tnt.com> wrote: > > > >>John Rigby wrote: > >> > >>> > >>>On 1/25/06, *Sylvain Munaut* <tnt at 246tnt.com <mailto:tnt at > >>>246tnt.com>> wrote: > >>> > >>> > >>> > >>> Should apply fine on vanilla. My suggestion for now is take vanilla, > >>> apply this patch, then the 2-3 patch from Andrey for BestComm and > >>> stuff. > >>> > >>> > >>>I was working on getting bestcomm and fec working, but forward porting > >>>my old 2.6.10 code to current is turning out to be more difficult than I > >>>expected. > >>>If you already have working code then I'll stop working on them. > >>> > >>>Where are these patches? I'm new to this list so I don't have much > >>>history. > >>>Would I find these patches in the archive? > >> > >>Checkout (with git) > >> > >>http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx > >> > >>then apply > >> > >>http://gitbits.246tNt.com/patches/bcomm-to-split.diff > >> > >> (I haven't cleanly splitted it up yet and right now I must go, so it's > >>probably gonna be in the git tree this week, under the 'bestcomm' head ;) > >> > >> > >>Please report if it works fine on your board (both lite5200 and > >>lite5200b reports are welcome). I only did quick tests. > >> > >> > >> > >> Sylvain > >> > > > > > >
