and the arch/ppc/bestcomm directory as well looks like maybe you didn't do a git-update-index?
On 1/30/06, John Rigby <jcrigby at gmail.com> wrote: > Ok checked out the git tree and applied the patch. > The drivers/net/fec_mpc52xxx directory seems to be missing. > > On 1/30/06, John Rigby <jcrigby at gmail.com> wrote: > > Thanks, I had tried stripping off the http: and adding the .git but > > not just adding the .git. > > > > > > On 1/30/06, Sylvain Munaut <tnt at 246tnt.com> wrote: > > > Ooops, > > > > > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git > > > > > > (notice the previously missing .git at the end) > > > > > > > > > Sylvain > > > > > > John Rigby wrote: > > > > I tried: > > > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx > > > > and got: > > > > defaulting to local storage area > > > > Cannot get remote repository information. > > > > Perhaps git-update-server-info needs to be run there? > > > > > > > > > > > > > > > > On 1/29/06, Sylvain Munaut <tnt at 246tnt.com> wrote: > > > > > > > >>John Rigby wrote: > > > >> > > > >>> > > > >>>On 1/25/06, *Sylvain Munaut* <tnt at 246tnt.com <mailto:tnt at > > > >>>246tnt.com>> wrote: > > > >>> > > > >>> > > > >>> > > > >>> Should apply fine on vanilla. My suggestion for now is take > > > >>> vanilla, > > > >>> apply this patch, then the 2-3 patch from Andrey for BestComm and > > > >>> stuff. > > > >>> > > > >>> > > > >>>I was working on getting bestcomm and fec working, but forward porting > > > >>>my old 2.6.10 code to current is turning out to be more difficult than > > > >>>I > > > >>>expected. > > > >>>If you already have working code then I'll stop working on them. > > > >>> > > > >>>Where are these patches? I'm new to this list so I don't have much > > > >>>history. > > > >>>Would I find these patches in the archive? > > > >> > > > >>Checkout (with git) > > > >> > > > >>http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx > > > >> > > > >>then apply > > > >> > > > >>http://gitbits.246tNt.com/patches/bcomm-to-split.diff > > > >> > > > >> (I haven't cleanly splitted it up yet and right now I must go, so it's > > > >>probably gonna be in the git tree this week, under the 'bestcomm' head > > > >>;) > > > >> > > > >> > > > >>Please report if it works fine on your board (both lite5200 and > > > >>lite5200b reports are welcome). I only did quick tests. > > > >> > > > >> > > > >> > > > >> Sylvain > > > >> > > > > > > > > > > > > > > > > >
