Armin Kuster wrote: > > Kenneth Johansson wrote: > > > > But the ethernet reporting of the line is wrong. This is a problem with the > > printout only as the function is right. The 100Mb full duplex is reported to > > be 10Mb half and vise verse. > > > > Kenneth; > > I finally got arround to looking into this and the problem is the > status. > We use the status to program the emac to the same speed as the PHY. > > I have attach a patch the should correct this.
I saw that this was also in the devel tree so I updated my copy and yes the printout is now right. But "time dd if=/dev/zero of=testing bs=1024k count=100" on a nfs mouted fs used to be 18s and is now 21s, a 16% slowdown not that I care much but still quite a large difference. And I have not tired this on my 10Mb port yet as I still have only one active but as soon as they work again I test on 10Mb. -- Kenneth Johansson Ericsson Business Innovation AB Tel: +46 8 404 71 83 Vider?gatan 3 Fax: +46 8 404 72 72 164 80 Stockholm kenneth.johansson at inn.ericsson.se ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
