shagitgy at techst02.technion.ac.il writes:
>
> Hi
> I have an mpc8260 board and Linux running on it (I uses Lineo's BSP with
> kernel
> 2.4.1). I want to run the atm8260-1.0.1 on my board. My phy is s/uni pm 5350-
> rc.
> My question is:
> Can I use the package from: https://sourceforge.net/projects/atm8260/ as is?
You can use it. Just unpack the files in arch/ppc/ppc/8260_io.
Add this line to the Makefile in that directory:
obj-$(CONFIG_UTOPIA) += mpc8260sar.o mpc8260sar_detect.o intpool.o mpool.o \
risctimer.o mm.o cpmtimer.o utopia.o debug.o
mpc8260iop.o
and this line to Config.in (same directory):
bool 'CPM FCC ATM/UTOPIA' CONFIG_UTOPIA
For the kernel config file you need to enable at least these options:
CONFIG_ATM=y
CONFIG_UTOPIA=y
PS. Check the #defines in the unpacked files if they are correct for your
situation.
> How can I use it? should I compile it with the kernel, or can I insert it as
> a
> loadable module (I didnt find the module_init() call).
You can't use it as a loadable module, just compile it directly in the kernel.
--
willy
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
