Hello all. I am using the mpc8260ads board running the 2.4.4 kernel and the phy is also the pm5350.
In reference to the message below, why can't you use the code as a loadable module? I have tried it this way, and it does eventually compile and insert, although it doesn't do much else at the moment. I have also tried to compile the code into the kernel, but that is proving to be more difficult than just doing what you stated below. There are a whole lot of undefined reference errors. By the way, the module_init() is in the file mpc8260sar_detect.c. Please let me know why you say that it must be compiled into kernel, and also any other steps or defines that I may need. You also don't make any mention of the suni/phy code below. How should that be compiled in or included? Thank you. -----Original Message----- From: w.n. jacobs [mailto:[EMAIL PROTECTED] Sent: 16 September 2003 08:23 AM To: shagitgy at techst02.technion.ac.il Cc: linuxppc-embedded at lists.linuxppc.org Subject: Re: atm8260-1.0.1 shagitgy at techst02.technion.ac.il writes: > > Hi > I have an mpc8260 board and Linux running on it (I uses Lineo's BSP with kernel > 2.4.1). I want to run the atm8260-1.0.1 on my board. My phy is s/uni pm 5350- > rc. > My question is: > Can I use the package from: https://sourceforge.net/projects/atm8260/ as is? You can use it. Just unpack the files in arch/ppc/ppc/8260_io. Add this line to the Makefile in that directory: obj-$(CONFIG_UTOPIA) += mpc8260sar.o mpc8260sar_detect.o intpool.o mpool.o \ risctimer.o mm.o cpmtimer.o utopia.o debug.o mpc8260iop.o and this line to Config.in (same directory): bool 'CPM FCC ATM/UTOPIA' CONFIG_UTOPIA For the kernel config file you need to enable at least these options: CONFIG_ATM=y CONFIG_UTOPIA=y PS. Check the #defines in the unpacked files if they are correct for your situation. > How can I use it? should I compile it with the kernel, or can I insert it as a > loadable module (I didnt find the module_init() call). You can't use it as a loadable module, just compile it directly in the kernel. -- willy ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
