Dear Amit, in message <AD2F581BD7340A4C908AF1AFB066EA3B0E4819 at ntah901e.savan.com> you wrote: > > The process has finished sucessfully but after switching the power and > setting back the J4 jumper nothing came up.
I'm sorry, but I never used a MBX board with PPCBoot or U-Boot myself, so my experience is limited. > EPPC-Bug>pflash 4000:83fff fc000100 > > Source Starting/Ending Addresses =00004000/00087FFE > > Destination Starting/Ending Addresses =FC000100/FC0840FE > > Number of Effective Bytes =00083FFF (&540671) There are two obvious errors here: First, U-Boot must start at offset 0, not 0x100; I don't know if FC000100 is the correct address - if the "FC" prefix is correct (*) then you must program the image to FC000000, not FC000100. (*) The U-Boot configuration for the MBX-Board sets TEXT_BASE = 0xFE000000 so please double-check your address. Second, the image size of >500 kB is wrong. You must flash the "u-boot.bin" image, which should be in the 120..130 kB range. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Always borrow money from a pessimist; they don't expect to be paid back. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
