Dear Amit, in message <AD2F581BD7340A4C908AF1AFB066EA3B0E4831 at ntah901e.savan.com> you wrote: > > I have compiled u-boot for mbx860, created uImage (using the sources from > denx site) but have > a problem when I try to run the uImge on the board, follows what I get: ... > => bootm 0x20000 > ## Booting image at 00020000 ... > Image Name: Linux-2.4.20 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 842305 Bytes = 822.6 kB
Compressed size is 800+ kB, so uncompressed size will be around 2+ MB. > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... Error: inflate() returned -3 You load the image at 0x20000 = 128 kB. It will overwrite itself when it starts to uncompress and load the kernel. Use a higher download address, like 0x200000. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "We don't have to protect the environment -- the Second Coming is at hand." - James Watt ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
