Hi developers I have a MPC8272ADS board, from Freescale. I'm using low-boot configuration (HRCW is 0x0E_74_B2_0A).
I have ELDK 3.1 and ELDK 4.0 installed. I'm using U-Boot 1.1.4. When I compile U-Boot with GCC 3.3.3, the board works ok, but not with GCC 4.0.0. All the ethernet leds freeze turned on and the Run led too. It makes me thinking the board entered some loop state. Nothing appears at serial port. If anyone had this problem, or if anyone have such a configuration working (GCC 4 and U-Boot 1.1.4 with this board), any help will be very appreciated. Regards, Addison Baldwin
