Really sorry! I sent this message to the wrong list.
I'll send it to the U-Boot. Regards, Addison Baldwin On 2/1/06, Addison Baldwin <addison.baldwin at gmail.com> wrote: > Hi developers > > I have a MPC8272ADS board, from Freescale. I'm using low-boot > configuration (HRCW is 0x0E_74_B2_0A). > > I have ELDK 3.1 and ELDK 4.0 installed. I'm using U-Boot 1.1.4. When I > compile U-Boot with GCC 3.3.3, the board works ok, but not with GCC > 4.0.0. All the ethernet leds freeze turned on and the Run led too. It > makes me thinking the board entered some loop state. Nothing appears > at serial port. > > If anyone had this problem, or if anyone have such a configuration > working (GCC 4 and U-Boot 1.1.4 with this board), any help will be > very appreciated. > > Regards, > Addison Baldwin >
