>>There's actually an additional issue with the 440EP >>for my application. I'll be using it in a 5V PCI >>environment (due to the reuse of the existing host >>CPUs). > > Autsch! Those must be pretty old CPU's! Is this standard desktop PCI or > CompactPCI or PMC?
They're not too old ... but at $2k a piece, you don't want to just throw them away. The CPUs are Force Computers 735AR2 devices. They contain a Force Sentinel PCI-to-PCI bridge. The bridges can operate at 3.3V or 5V, but they decided to hardwire them for 5V operation to implement hot-swap. The other newer CPUs are Trenton CPLEs. http://www.trentontechnology.com/products/singleboards/5932.php4 The system uses cPCI crates. In some cases 21152 bridges are used to make larger backplanes, in other cases SBS bridges containing 21152's are used to link crates. >>Since the 440EP is not 5V tolerant, I figured >>I would add clamps or buffers to the board design. > > I would be careful here, since you easily can violate the pci > specs. Do you have other pci devices on this pci bus? Yeah, I'd make sure that I had others check my work. However, the 21555 would take care of it, and the only PCI bus on the board would be the one between the 440EP and the bridge. > Just use newer host CPU's! ;-) Ah, the words of a true engineer :) Of course the project manager wouldn't appreciate me doing that. However, its not totally out of the question ... $50 per 21555 and 20 per crate, thats $1000, about half the price of a CPU. But of course, without the I20 unit on the 440EP, I might need the 21555 anyway. Cheers Dave
