Hi,
I have a board which is close to Sandpoints mpc8245 cpu board.
(using internal DUARTs, EPIC_MODE_SERIAL)
Trying to get it working, I got until:
Filename 'pImage'.
Load address: 0x1000000
Loading: ################################T ###################T
##############
###T
##############################################################
##T #########################
done
Bytes transferred = 801369 (c3a59 hex)
=> bootm 1000000
## Booting image at 01000000 ...
Image Name: Linux-2.4.20
Created: 2003-03-04 23:57:29 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 801305 Bytes = 782 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
id mach(): done
MMU:enter
MMU:hw init
MMU:mapin
MMU:mapin_ram done
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
mpc10x:enter
mpc10x:exit
arch: exit
openpic: enter
openpic: timer
openpic: external
openpic: spurious
openpic: exit
then it stops. Any idea what it is waiting for ?
And another question, I don't see any of the "printk ()" outputs I put
in the code, did I missed a flag ?
Cheers & thanks for any help
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
