Dear Rick, Yes. I have downloaded the linuxppc-2.4 kernel. There is really the temac support. Thanks a lot for your information.
Also. MontaVista will release the pro 4.0 based on 2.6 in the end of this month. I think in this version, Temac will be included. Temac will be more popularly supported in the following versions, I think. Regards Ming >From: "Rick Moleres" <rick.moleres at xilinx.com> >To: "Ming Liu" <eemingliu at hotmail.com>, "rick.moleres" <rick.moleres at xilinx.com> >CC: <linuxppc-embedded at ozlabs.org> >Subject: RE: question about linux with Xilinx ML-403 >Date: Wed, 24 May 2006 12:52:02 -0600 > > >Ming, > >Another option for you may be to get MontaVista's latest linuxppc-2.4 kernel tree from source.mvista.com (using rsync), which I believe has the xilinx_gige directory and menuconfig entries. > >-Rick > >-----Original Message----- >From: Ming Liu [mailto:eemingliu at hotmail.com] >Sent: Wednesday, May 24, 2006 12:36 PM >To: rick.moleres >Cc: linuxppc-embedded at ozlabs.org >Subject: RE: question about linux with Xilinx ML-403 > >Dear Rick, >OK. I will try that. However I cannot promise to finish this very soon >because I am a novice. :) I will let you know if there is any result. > >Thanks for your method. > >BR >Ming > > > >From: "Rick Moleres" <rick.moleres at xilinx.com> > >To: "Ming Liu" <eemingliu at hotmail.com>, "rick.moleres" ><rick.moleres at xilinx.com> > >CC: <linuxppc-embedded at ozlabs.org> > >Subject: RE: question about linux with Xilinx ML-403 > >Date: Wed, 24 May 2006 10:25:10 -0600 > > > > > > > >Ming, > > > > > > > > > > > > >Our best recommendation is to use the drivers/net/xilinx_enet directory > > > > >for the temac driver and just enable the Xilinx 10/100 Ethernet in > > > > >menuconfig. > > > > > > > >I am not so clear with this. Do you mean that I just copy the source > >code > > > >in the directory of xilinx_gige generated by EDK into the directory of > > > >xilinx_enet in linux2.4.20, and then enable the Xilinx 10/100 ethernet > >in > > > >the menuconfig? Can this method realize the 1000M ethernet? The source > >code > > > >file names for Temac (xtemac_xxx.c or .h) are different with the ones > >for > > > >emac (xemac_xxx.c or .h). Can the xtemac files be recognized by the > >linux > > > >kernel? > > > > > > > >Right - you would need to copy the xtemac* files and the Makefile over, > >and would have to change the Makefile to make sure it produces > >xilinx_enet.o instead of xilinx_gige.o. We haven't tried this, but we > >don't think there's any reason this shouldn't work. Can you let us know > >how it goes? > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ >???? MSN Explorer: http://explorer.msn.com/lccn/ > > > _________________________________________________________________ ?????????????? MSN Messenger: http://messenger.msn.com/cn
