Hi:
I have linux 2.4.30 runnning on this board, the "reboot -f"
command cause machine check and kernel ooops. The problem seems in
the "m8260_gorom" in head.S. The restart() function in m8260_setup.c
passed 2 parameters to that assembly code, r3 is the bd_info , r4 is
the warm start address, I changed it to 0xFF800100, that's where the
u-boot's _start_warm lives, I have verified that address by typing "g
ff800100" in u-boot console, which cause the board reset.
I assume the m8260_gorom has been heavily tested for other
boards. I wonder if anyone got a PQ2FADS-VR board that has the similar
problem? I am not familar with the assembly code for PPC. Any
suggestions?
Thanks
lei
