Hi, I downloaded both the ramdisks. I would appreciate, if you can tell me what should i have as the value for "root=", in Kernel Command Line. Mine shows as "Linux/PPC load: console=ttyS0,19200 console=tty1 ip=off root=/dev/part rw".
And also, if i select the baud rate 19200, do i have to change anything in the linux code other than initial configuration file (defconfig). Thanks, Prakash --- Jim Potter <jrp at wvi.com> wrote: > > Check out Wolfgang Denk's example ramdisk images at: > > ftp.denx.de/pub/LinuxPPC/usr/src/mini-2048kB-ramdisk.image.gz > ftp.denx.de/pub/LinuxPPC/usr/src/simple-ramdisk.image.gz > > > Hi folks, > > > > If i want to build a smallest possible initrd, can > you > > suggest where i can get it from or how i can build > it? > > I am working with a custom made PPC405 based board > > with just 8MB RAM. > > > > thanks, > > Prakash > > -- > Sincerely, > > Jim Potter > 45th Parallel Processing > > Firefighting: Bustin' ours, Savin' yours. > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
