In message <20030113021509.36487.qmail at web41214.mail.yahoo.com> you wrote:
>
> I downloaded both the ramdisks. I would appreciate, if
> you can tell me what should i have as the value for
> "root=", in Kernel Command Line. Mine shows as
> "Linux/PPC load: console=ttyS0,19200 console=tty1
> ip=off root=/dev/part rw".
root=/dev/ram rw console=ttyS0,19200 ip=off
should be what you need.
> And also, if i select the baud rate 19200, do i have
> to change anything in the linux code other than
> initial configuration file (defconfig).
You don't have to change anything in the kernel. The baudrate is
passed by the boot loader.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Veni, Vidi, VISA:
I came, I saw, I did a little shopping.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
