Dan Douglass wrote: >Mark, > >Can you give me some insight as to where it is located then? I do not see >support for it in U-Boot nor the kernel version I mentioned (2.4.21). > > Dan,
You must not be looking in the right place (for kernel support). Sandpoint X3 support is in the linuxppc_2_4_devel tree. You can clone the bk repository at bk://ppc.bkbits.net/linuxppc_2_4_devel. As far as U-Boot, I don't use it but I thought it ran on the sandpoint (at least, I think PPCBoot used to). DINK comes on the sandpoint & the zImage.sandpoint produced when you build the kernel (make zImage) will run on recent versions of that firmware. If you need more help getting the source, try looking at http://penguinppc.org/dev/kernel.shtml Note that there are currently a few problems with IDE in that tree right now. If you're looking for a truly supported version, go to http://www.mvista.com and/or [I believe] http://www.denx.de. There are probably others as well. Mark ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
