I am using the Linux Kernel 2.4.24-pre2. I included support for this board and created an embed_config() routine to pass in the correct board information. I am now able to see the "relocation" messages by zImage and it now halts with the message "Now booting the kernel". I see that it is now hung in some delay routine which was called from a panic routine. I am working on trying to figure this out.
>go 210000 loaded at: 00210000 002D426C relocated to: 00400000 004C426C board data at: 004C1130 004C115C relocated to: 004052D8 00405304 zimage at: 00405810 004C0CC4 avail ram: 004C5000 10000000 Linux/PPC load: root=/dev/nfs rw ip=on Uncompressing Linux...done. Now booting the kernel --- Tom Rini <trini at kernel.crashing.org> wrote: > On Mon, Oct 11, 2004 at 02:18:59PM -0700, annamaya > wrote: > > > I do not have any other logs when this happens > since I > > dont have any serial output when the failure > happens. > > I am trying to do this on a EP8280 eval board. Has > > someone already included support for this board in > the > > Kernel? Thank you. > > Without knowing which kernel you're using, I can't > say for certain, but > would assume it should work. When you type 'go > 0x210000' after loading > the kernel, you get nothing? > > -- > Tom Rini > http://gate.crashing.org/~trini/ > _______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com
