This patch doesn't seem to working quite right on my hardware (Phytec pcm030). At boot I get a long pause.
I have a long pause when Ethernet is initializing [ 0.798529] NET: Registered protocol family 1 [ 0.802988] NET: Registered protocol family 17 [ 1.313708] net eth0: attached phy 0 to driver Generic PHY [ 2.320013] Sending DHCP requests ...... timed out! [ 81.968863] IP-Config: Retrying forever (NFS root)... [ 82.477527] net eth0: attached phy 0 to driver Generic PHY [ 83.487809] Sending DHCP requests .<6>PHY: f0003000:00 - Link is Up - 100/Full [ 86.323795] ., OK [ 88.579802] IP-Config: Got DHCP answer from 192.168.1.200, my address is 192.168.1.5 [ 88.587923] IP-Config: Complete: Reverting back to 0008-drivers-net-Add-support-for-Freescale-MPC5200-SoC-i.patch the pause goes away. [ 0.793916] TCP cubic registered [ 0.797309] NET: Registered protocol family 1 [ 0.801808] NET: Registered protocol family 17 [ 1.309611] eth0: config: auto-negotiation on, 100HDX, 10HDX. [ 2.316014] Sending DHCP requests .., OK [ 7.124005] IP-Config: Got DHCP answer from 192.168.1.200, my address is 192.168.1.5 [ 7.132121] IP-Config: Complete: [ 7.135212] device=eth0, addr=192.168.1.5, mask=255.255.255.0, gw=192.168.1.200, [ 7.143192] host=MPC, domain=home, nis-domain=(none), [ 7.148778] bootserver=192.168.1.200, rootserver=192.168.1.4, rootpath= Something not quite right with interrupts maybe? I'm trying to debug it. -- Jon Smirl [EMAIL PROTECTED] _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
