[ 1.309662] net eth0: attached phy 0 to driver Generic PHY [ 2.316013] Sending DHCP requests .<6>PHY: f0003000:00 - Link is Up - 100/Full [ 4.392000] ., OK [ 7.100005] IP-Config: Got DHCP answer from 192.168.1.200, my address is 192.168.1.5 [ 7.108154] IP-Config: Complete: [ 7.111247] device=eth0, addr=192.168.1.5, mask=255.255.255.0, gw=192.168.1.200, [ 7.119249] host=MPC, domain=home, nis-domain=(none), [ 7.124811] bootserver=192.168.1.200, rootserver=192.168.1.4, rootpath=
DHCP wants to print "Sending DHCP requests .., OK" But the interrupt from the link coming up printed "<6>PHY: f0003000:00 - Link is Up - 100/Full" The <6> is visible since it wasn't on the beginning of a line. -- Jon Smirl [EMAIL PROTECTED] _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
