On Thursday 27 September 2007 19:07, Juergen Beisert wrote: > On Friday 10 August 2007 11:51, Domen Puncer wrote: > > Not for merge (yet)! But please do review. > > > > fec_mpc52xx driver (not in-tree, but floating around) isn't in very > > good shape, so I tried to change that. > > Diff against original is quite big (fec_phy.c is completely rewritten) > > and confuzing, so I'm including whole drivers/net/fec_mpc52xx/ . > > > > I still have 'make CONFIG_FEC_MPC52xx_MDIO=n compile and work' on my > > TODO, maybe even ethtool support.
I add a few more debug outputs and now with this driver I can run a $ nmap <ip> from my host against the target and target's network stops always at the same point. The last output from the driver is (with DEBUG macro defined): net eth0: ievent: 08020000 and no further interrupt occurs anymore (I checked all three interrupt entry functions) nmap on host's side outputs: Starting Nmap 4.20 ( http://insecure.org ) at 2007-09-28 16:56 CEST Interesting ports on 192.168.23.226: Not shown: 852 filtered ports, 843 closed ports PORT STATE SERVICE 22/tcp open ssh 23/tcp open telnet Nmap finished: 1 IP address (1 host up) scanned in 14.120 seconds But I can't run it a second time, as the network on target's side doesn't respond. Any idea? Juergen -- Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9 _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
