> -----Original Message----- > From: > [EMAIL PROTECTED] > org > [mailto:linuxppc-embedded-bounces+joakim.tjernlund=lumentis.se > @ozlabs.org] On Behalf Of Scott Wood > Sent: den 26 oktober 2007 00:08 > To: Rune Torgersen > Cc: linuxppc-embedded@ozlabs.org > Subject: Re: Porting to /arch/powerpc > > Rune Torgersen wrote: > > Is there a good platform/documents to look at for doing a board port > > from arch/ppc to arch/powerpc? > > I'm porting a 8266/8280 based board with PCI and 2 FCC ethernets > > connected phy-less to a switch. > > Look at head-of-tree for 82xx stuff (lots of changes since 2.6.23)... > any of the 82xx boards in arch/powerpc should be good to look at. > > The fs_enet driver doesn't currently support phy-less > directly, but you > may be able to do something with the fixed phy driver.
How is PHY less support supposed to be impl.? I would like to do the same for ucc_geth. I once sent a patch that made the PHY optional, but it never made into the driver. Jocke > > -Scott _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
