Hi, I have been suing the eldk4.1 tool chain for a few months now and have not not encountered any problems with building until now. I build for two slightly different archs, ppc_85xx and ppx_82xx.
The problem I have come up against is related to some of the semaphore functions in semaphore.h, namely sem_wait, sem_post. This was originally noticed in a third party driver I am porting from one board to another but a small test program has shown the same results. Calls to these functions on the ppc_82xx platform return -1 with an error code of 38, in this case meaning ENOSYS (not implemented). On the ppc_85xx the same program executes fine, thus I conclude that it is specific to the libc-2.3.5 for ppc_82xx. Has anyone else come across this problem, I did find one thread but there was no conclusion listed. I also can not find anything stating that these functions are not implemented for the 82xx arch compared with others for the eldk4.1 Thanks Stuart _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
