On 12/8/07, Jean-Samuel Chenard <[EMAIL PROTECTED]> wrote: > Hi, > > Thanks to the valuable information provided by this discussion group and > particularly by Grant Likely from Secret Lab Technologies, I was able to > setup and run Linux 2.6 on my ML-310 development platform.
Congratulations. If you had to make any changes to get it to work then please send me your patches. > > On the ML-310, if I want to use the Ethernet port and some other > peripherals, I need to go through the PCI bus via the opb_pci core on the > FPGA. > > However, when I enable PCI support in the kernel, I get the following error > messages: You'll have to go back into the mailing list archives to find a patch for adding PCI support for a Virtex platform. I don't have any of that in my tree. It probably only exists for the 2.4 kernel. You'll need to port forward to use it on 2.6 (I'm more than willing to help you with this) However, word of warning. The Xilinx PCI bridge is badly broken. Xilinx is not supporting the PCI core and it is missing the ability to do certain types of transfers. Last I heard, Xilinx has no plans to fix their PCI core either. Best of luck, g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
