Hi Russell, > Next question, I can see that 'quick' mods I have made to the Marvell driver > are indeed matching up with the device ID that the Freescale MII device is > pulling back from my 'National' part. <I'll make a real phy driver once I > get this working>. I.e. I can see the phy_probe get called when this Id is > registered. You can see the extra debug messages above the National DP83865 > device registration, and the probe returns 0 for success I assume. <err = > 0>. > > I am still getting the "IP-Config: No network devices" error before the NFS > boot tries to take place.
I would add some more debugging printk output to check where the device initialisation fails. Or if the phy runs without any initialisation, you could use the fixed-phy patches from Vitali Bordug and hardcode the speed and duplex settings in the device tree until you real phy driver is finished. thanks, Jochen _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
