Hi, I'm having some networking troubles with the Xilinx LLTEMAC driver from the Xilinx Linux git tree (powerpc arch) on an ML403 board. EDK9.2SP2, xps_ll_temac v1.00.b
The weird thing is, that it sort of half works. It successfully makes a DHCP request and gets its IP address. I tried setting up a tftpd server, and I can see UDP requests coming in but the response doesn't seem to come out. I also tried running a TCP server on the board, and it can see and accept incoming connections but after that no data seems to get through. I can ping out and get around 40% packet loss. Looking at /proc/interrupts, I can see both TxDma interrupts and RxDma interrupts. No eth0 interrupts but that seems to be OK judging by the driver source comments. Ifconfig shows no collistions, no dropped packets, no errors, so the system seems to think that everything is OK. Clues anyone? I'm starting to run out of ideas... Best regards, Magnus -- Magnus Hjorth, M.Sc. Omnisys Instruments AB Gruvgatan 8 SE-421 30 Västra Frölunda, SWEDEN Phone: +46 31 734 34 09 Fax: +46 31 734 34 29 http://www.omnisys.se _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
