I don't know, I'm not familiar with what you are doing and it's not clear from the message. -- John
________________________________ From: rodolfo [mailto:[EMAIL PROTECTED] Sent: Wed 5/28/2008 12:05 PM To: John Linn Cc: Mirek23; linuxppc-embedded@ozlabs.org Subject: RE: Cross toolchain for ppc405 (virtex-4) Hi Jonh, If I use ml403 (with PPC 405) Did i change the predefined compiler flags for ppc_4xx? The default value is -mcpu=403. On Wed, 28 May 2008 11:16:41 -0600, "John Linn" <[EMAIL PROTECTED]> wrote: > Hi Miroslaw, > > I'm not sure on what version of gcc and glibc it's using, but I have been > using ELDK 4.1 from denx.com. There are newer versions. > > Thanks, > John > > > > -----Original Message----- > From: [EMAIL PROTECTED] on behalf > of Mirek23 > Sent: Wed 5/28/2008 9:54 AM > To: linuxppc-embedded@ozlabs.org > Subject: Cross toolchain for ppc405 (virtex-4) > > > Hi All, > > I am using for some time the crosstool tool-chain (crosstool-0.43) for the > ppc405 of my virtex-4. > It seems to be that the crosstool was not updated for awhile but the glibc > and gcc compiler has changed a bit meanwhile. > > The latest working configuration to build the toolchain for ppc405 is > gcc-4.1.0-glibc-2.3.6.dat > Does any body has tried to adapt the crosstools to use for example glibc > 2.7 > ? > > Another alternative would be to use another tool than crosstool. Could > somebody recommend something which can refer to newer version of gcc and > glibc . > > Best Regards > > Miroslaw Dach > > This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
