I'm sorry. I want build kernel linux 2.6 for ml403. Did I have to change the predefined compiler flags for ppc_4xx? The default value is -mcpu=403.
On Wed, 28 May 2008 13:32:51 -0600, "John Linn" <[EMAIL PROTECTED]> wrote: > I don't know, I'm not familiar with what you are doing and it's not clear > from the message. > > -- John > > ________________________________ > > From: rodolfo [mailto:[EMAIL PROTECTED] > Sent: Wed 5/28/2008 12:05 PM > To: John Linn > Cc: Mirek23; linuxppc-embedded@ozlabs.org > Subject: RE: Cross toolchain for ppc405 (virtex-4) > > > > Hi Jonh, > > If I use ml403 (with PPC 405) Did i change the predefined compiler flags > for ppc_4xx? The default value is -mcpu=403. > > On Wed, 28 May 2008 11:16:41 -0600, "John Linn" <[EMAIL PROTECTED]> > wrote: >> Hi Miroslaw, >> >> I'm not sure on what version of gcc and glibc it's using, but I have > been >> using ELDK 4.1 from denx.com. There are newer versions. >> >> Thanks, >> John >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] on > behalf >> of Mirek23 >> Sent: Wed 5/28/2008 9:54 AM >> To: linuxppc-embedded@ozlabs.org >> Subject: Cross toolchain for ppc405 (virtex-4) >> >> >> Hi All, >> >> I am using for some time the crosstool tool-chain (crosstool-0.43) for > the >> ppc405 of my virtex-4. >> It seems to be that the crosstool was not updated for awhile but the > glibc >> and gcc compiler has changed a bit meanwhile. >> >> The latest working configuration to build the toolchain for ppc405 is >> gcc-4.1.0-glibc-2.3.6.dat >> Does any body has tried to adapt the crosstools to use for example glibc >> 2.7 >> ? >> >> Another alternative would be to use another tool than crosstool. Could >> somebody recommend something which can refer to newer version of gcc and >> glibc . >> >> Best Regards >> >> Miroslaw Dach >> >> > > > > > > > This email and any attachments are intended for the sole use of the named > recipient(s) and contain(s) confidential information that may be > proprietary, privileged or copyrighted under applicable law. If you are not > the intended recipient, do not read, copy, or forward this email message or > any attachments. Delete this email message and any attachments immediately. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
