Hi John I am using UARTLITE as serial console. I do not have license for UART 16550. I have enabled the drivers for uartlite in menuconfig while configuring the kernel. I have tested all combinations for the kernel command line - tty0, ttyUL0, ttyl0, ttyS0 but could not get uartlite to output kernel printk messages.
Since I am using uartlite , the following settings are turned off in menuconfig CONFIG_SERIAL_8250=n CONFIG_SERIAL_8250_CONSOLE=n I have seen many posts claim that uartlite seems to work with ttyUL0 setting in the kernel command line but I am having trouble with that. Thanks swamy Hi Swamy, Sorry for the long delay. Sounds like the console is not setup correctly. I notice in your command line it appears that you have 2 console statements. I have not tested this ever and I would change it to only have the console=ttyS0,9600. I have seen other mailings, no Xilinx specific, related to this causing problems. This console setup assumes you're using the Xilinx 16550 UART. It could be an issue with the xparameters*.h file with the address of the UART. Have you compared your arch/ppc/platforms/4xx/xparameters/xparameters*.h file, whichever one it's setup to use, to the ones that we provided in the Git tree? I'm assuming you have the kernel configured correctly to use the UART16550 driver and the console is turned on, both are needed. The 16550 is 8250 compatible (mostly) and works with it's driver from Linux. CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y Thanks, John -- View this message in context: http://www.nabble.com/linux-2.6-hangs-at-__delay-function-on-Viretx-4-board-tp17222725p17638198.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
