In 10.1, it is actually free... > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc-embedded- > [EMAIL PROTECTED] On Behalf Of Howard, Marc > Sent: Wednesday, June 04, 2008 2:45 PM > To: John Linn; Peter Korsgaard; swamydp > Cc: linuxppc-embedded@ozlabs.org > Subject: RE: linux 2.6 hangs at __delay function on Viretx 4 board > > Every year at the Embedded Systems Conference I would complain to the > Xilinix folks about the 16550 not being free. This year I complained & > they told me that even though it is listed as a purchased core when you > go to "buy" it you get it for free. This was just prior to the 10.x > release. > > Marc W Howard > > > -----Original Message----- > > From: > > [EMAIL PROTECTED] > g [mailto:linuxppc-embedded-bounces+marc.howard=kla-> > [EMAIL PROTECTED] On Behalf Of John Linn > > Sent: Wednesday, June 04, 2008 2:23 PM > > To: Peter Korsgaard; swamydp > > Cc: linuxppc-embedded@ozlabs.org > > Subject: RE: linux 2.6 hangs at __delay function on Viretx 4 board > > > > Hi Peter, > > > > Yes you need to enable UARTLITE as the console in the kernel > > configuration. > > > > You have the command line syntax, ttyUL0, correct. > > > > They have now changed the UART 16550 to be a free core in the EDK, not > > sure which version of the EDK that happened. > > > > Thanks, > > John > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On > > Behalf Of Peter Korsgaard > > Sent: Wednesday, June 04, 2008 2:56 AM > > To: swamydp > > Cc: linuxppc-embedded@ozlabs.org > > Subject: Re: linux 2.6 hangs at __delay function on Viretx 4 board > > > > >>>>> "swamydp" == swamydp <[EMAIL PROTECTED]> writes: > > > > swamydp> Hi John > > > > swamydp> I am using UARTLITE as serial console. I do not have license > > swamydp> for UART 16550. I have enabled the drivers for uartlite in > > swamydp> menuconfig while configuring the kernel. I have tested all > > swamydp> combinations for the kernel command line - tty0, ttyUL0, > > swamydp> ttyl0, ttyS0 but could not get uartlite to output kernel > > swamydp> printk messages. > > > > Correct syntax is console=ttyUL0 > > > > swamydp> Since I am using uartlite , the following settings are > > swamydp> turned off in menuconfig > > > > swamydp> CONFIG_SERIAL_8250=n > > swamydp> CONFIG_SERIAL_8250_CONSOLE=n > > > > Do you have console on uartlite (CONFIG_SERIAL_UARTLITE_CONSOLE) > > enabled? > > > > -- > > Bye, Peter Korsgaard > > _______________________________________________ > > Linuxppc-embedded mailing list > > Linuxppc-embedded@ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > > > > This email and any attachments are intended for the sole use > > of the named recipient(s) and contain(s) confidential > > information that may be proprietary, privileged or > > copyrighted under applicable law. If you are not the intended > > recipient, do not read, copy, or forward this email message > > or any attachments. Delete this email message and any > > attachments immediately. > > > > > > _______________________________________________ > > Linuxppc-embedded mailing list > > Linuxppc-embedded@ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
