Matvejchikov Ilya wrote:
Hi all!
There is a problem with 2.6.25.4 kernel on the pq2fads based board.
Works for me using cuImage.
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.6.25.4
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1534783 Bytes = 1.5 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Flattened Device Tree blob at 00800000
Booting using the fdt blob at 0x800000
Loading Device Tree to 007fe000, end 007fffff ... OK
I don't see FDT support for this board in current u-boot (I should
really get around to fixing that...), so I assume you're using a
modified u-boot?
Xid mach(): done
MMU:enter
MMU:hw init
MMU:mapin
MMU:setio
MMU:exit
<<---- the reset was here :(
Perhaps your u-boot isn't properly filling in the memory node.
Oh, and just in case -- if you're using binutils 2.17, it's buggy.
-Scott
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
