Hi, I try to get 2.6.25.6 running on Freescale's MPC8641D-HPCN (Processor is revision 1), but somehow the PCI express controller setup fails:
PCI: Probing PCI hardware PCI: 0000:00:00.0: class b20 doesn't match header type 01. Ignoring class. PCI: 0001:02:00.0: class b20 doesn't match header type 01. Ignoring class. PCI: Closing bogus Apple Firmware region 1 on bus 0x03 PCI: Closing bogus Apple Firmware region 2 on bus 0x03 PCI: Cannot allocate resource region 0 of device 0000:01:1d.0, will remap PCI: Cannot allocate resource region 1 of device 0000:01:1d.1, will remap PCI: Failed to allocate I/O resource #0:[EMAIL PROTECTED] for 0000:01:1d.0 PCI: Failed to allocate I/O resource #1:[EMAIL PROTECTED] for 0000:01:1d.1 PCI: not setting up bridge 0000:00:00.0 for bus 1 PCI: Enabling device 0000:00:00.0 (0106 -> 0107) PCI: not setting up bridge 0001:02:00.0 for bus 3 PCI: Enabling device 0001:02:00.0 (0106 -> 0107) - PCIe worked with 2.6.20.7 on this board, but unfortunately SMP support was not ready then. - on MPC8610-HPCD, PCIe works with 2.6.25.6, so I wonder what could be the difference. Any ideas? Best regards, Reinhard _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
