Reinhard Weiss ha scritto:
Hi,
I try to get 2.6.25.6 running on Freescale's MPC8641D-HPCN (Processor is
revision 1), but somehow the PCI express controller setup fails:
PCI: Probing PCI hardware
PCI: 0000:00:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: 0001:02:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Closing bogus Apple Firmware region 1 on bus 0x03
PCI: Closing bogus Apple Firmware region 2 on bus 0x03
PCI: Cannot allocate resource region 0 of device 0000:01:1d.0, will remap
PCI: Cannot allocate resource region 1 of device 0000:01:1d.1, will remap
PCI: Failed to allocate I/O resource #0:[EMAIL PROTECTED] for 0000:01:1d.0
PCI: Failed to allocate I/O resource #1:[EMAIL PROTECTED] for 0000:01:1d.1
PCI: not setting up bridge 0000:00:00.0 for bus 1
PCI: Enabling device 0000:00:00.0 (0106 -> 0107)
PCI: not setting up bridge 0001:02:00.0 for bus 3
PCI: Enabling device 0001:02:00.0 (0106 -> 0107)
- PCIe worked with 2.6.20.7 on this board, but unfortunately SMP support was not ready then.
- on MPC8610-HPCD, PCIe works with 2.6.25.6, so I wonder what could be the difference.
Any ideas?
Best regards,
Reinhard
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
I'm working with this board and I'm beginning to doubt that the pci
express works well. You can see my problems in my previous posts in this
mailing list sometimes ago.
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
[EMAIL PROTECTED]
+39 06 72582838
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
