Hi,
Yes I am using ARCH=ppc (actual line is $make ARCH=ppc
CROSS_COMPILE=powerpc-405-linux-gnu- zImage.initrd ) for this I have
placed ramdisk.image.gz in arch/ppc/boot/images. In case of ARCH=powerpc
I cannot find processor type 405 , in make menuconfig. Thats why i am
using ARCH=ppc.
And when I give kernel command string as init=/bin/sh , it says :
>Failed to execute /bin/sh. Attempting defaults...
[ 3.744035] Kernel panic - not syncing: No init found. Try passing
init= option to kernel.
[ 3.768073] Rebooting in 30 seconds..
--init is present in sbin/init which is a soft link to ../bin/busybox
--I used powepc-405-gnu-readelf -h bin/sh to verify that it is compiled
for powerpc itself.
Any other suggestions ?
-----------------------------------------------------
Neeraj Garg
Grant Likely wrote:
On Wed, Jul 09, 2008 at 10:24:13AM +0530, neeraj garg wrote:
Hi,
I am trying to boot ML405 with Linux source code downloaded from
http://www.git.xilinx.com . My cross compiler tool chain version is
gcc-3.4.1, glibc-2.3.2 and binutils-2.15. I have also downloaded RAMDISK
from same url (http://www.git.xilinx.com). When I download
zImage.initrd.elf using XMD everything goes fine, untill RAMDISK is
uncompressed, I get following messages :
<snip>
[ 3.736691] Failed to
execute /sbin/init. Attempting defaults...
[ 3.748073] Kernel panic - not syncing: No init found. Try passing
init= option to kernel.
[ 3.772040] Rebooting in 180 seconds..[ 183.487314] Signal: 8
Try changing the kernel parameters line to specify init=/bin/sh and see
what happens.
g.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
