In addition to what John wrote, I would also investigate your ramdisk. I would be sure to check that you have the permissions/owner set correctly on bin/busybox. Also, I would double check that, if you compiled busybox with shared libraries, the shared libraries are in the right place on your ramdisk.
Ron > > Hi, > > Yes I am using ARCH=ppc (actual line is $make ARCH=ppc > CROSS_COMPILE=powerpc-405-linux-gnu- zImage.initrd ) for this I have > placed ramdisk.image.gz in arch/ppc/boot/images. In case of ARCH=powerpc > I cannot find processor type 405 , in make menuconfig. Thats why i am > using ARCH=ppc. > > And when I give kernel command string as init=/bin/sh , it says : > >Failed to execute /bin/sh. Attempting defaults... > [ 3.744035] Kernel panic - not syncing: No init found. Try passing > init= option to kernel. > [ 3.768073] Rebooting in 30 seconds.. > > --init is present in sbin/init which is a soft link to ../bin/busybox > > --I used powepc-405-gnu-readelf -h bin/sh to verify that it is compiled > for powerpc itself. > > Any other suggestions ? > _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
