dear georg,


On Tue, 9 Sep 2008, Georg Schardt wrote:

Yes, i will try this. i use this board with the edk 8.2 a year ago. with this edk version the emaclite was working fine. but in this project there was an ip core "Hard Temac" this is missing now. i think i have an error in my edk project.

for the EMAC lite you don't need the hard temac. the work done by
the "hard temac" core and the plb_temac (or ll_temac) core together
in your old project will be done by the EMAC lite core alone.

so the signals to/from the broadcom PHY on your minimodule should be
connected directly to the EMAC lite core:

        BEGIN opb_ethernetlite
         PARAMETER INSTANCE = etherlite
         PARAMETER HW_VER = 1.01.b
         PARAMETER C_RX_PING_PONG = 1
         PARAMETER C_TX_PING_PONG = 1
         ...
         BUS_INTERFACE sopb = opb
         PORT IP2INTC_Irpt = emac_interrupt
         PORT phy_rx_data = phy_rxd
         PORT phy_tx_data = phy_txd
         PORT phy_dv = phy_rxdv
         ...
        END

(but this is probably getting off topic for this list.)


--
mazsi

----------------------------------------------------------------
strawberry fields forever!                       [EMAIL PROTECTED]
----------------------------------------------------------------
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Reply via email to