Dear all,
Has someone manage to use the driver for the Xilinx xps_hwicap core to
reconfigure bitstreams? I have enabled the driver in Linux configuration
(version 2.6.24 from Xilinx tree). However I failed to use it to reconfigure
bitstreams. The operations are listed as follows:
# cp partial.bit /dev/icap0#
No error information is shown, however the partial bitstream is not
successfully configured. I checked /proc/devices and the device "icap" has been
successfully registered with the major of 259. But in /proc/interrupts, I
didn't find any matching entry of the interrupt for icap core. I tried to
reconfigure the PR module with JTAG, and my design works well.
Any hints for this problem? Is the problem on the interrupt? Thanks so much if
someone can help me.
BR
Ming
_________________________________________________________________
用手机MSN聊天写邮件看空间，无限沟通，分享精彩！
http://mobile.msn.com.cn/
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
